Results 1 to 10 of 12
Threaded View
-
07-13-2019, 06:30 AM #4
Hello;
I have printed with a Prusa i3 Clone Hictop 3DP11/12 for some years now and have had no problems printing ABS.
It is much easier to print ABS when using an enclosure. I basically made a simple enclosure using a single sheet of particle board and Clear plastic sheets.
The Twins 2.jpg
Taking a sheet of particle board and cutting it into 5 pieces and fitting them together into a box with one open side where the Clear Plastic door attach.
Now this is not a great piece of work as it slipped when being glued together a little out of square, oh well!
I still have little problems with ABS when printing real thin pieces as they are too fragile and break easily while the same print in PLA works?Last edited by Roberts_Clif; 07-20-2019 at 05:45 PM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help