Results 1 to 10 of 12
Thread: Print Globs Mid Print
Threaded View
-
05-10-2019, 12:19 PM #6
- Join Date
- May 2019
- Posts
- 8
The demo version is was to test and see if it was a failure at a specific height and it failed at various heights the 3 times I tried printing it. When rotated so that the threads are at the top the dimensions should be 65.88mm tall (longest dimension).
I was able to print another file using the same settings but slightly wider and 5.5 inches tall with no failures.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion