Results 1 to 4 of 4
-
05-08-2019, 03:19 AM #1
- Join Date
- May 2019
- Posts
- 2
Creality CR-10S Pro loud fillament cooling fan
Hi,does anybody have a good idea on how to reduce the noise of the fillament cooling fan on a CR-10s Pro? Can the speed be controlled by software?Is there a more silent fan-replacement?Sorry for my stupid questions - i am completely new to 3D-printing.
-
05-08-2019, 09:35 AM #2
Yes!!! You are correct on all.
Excluding calling your questions stupid, There is only one stupid question - that is a question that was never asked!!!
You should have control of the fan on your CR 10 through the LCD Fan Speed menu Item.
OR
http://marlinfw.org/docs/gcode/M106.htmlLast edited by Roberts_Clif; 05-08-2019 at 09:43 AM.
-
05-09-2019, 05:49 AM #3
- Join Date
- May 2019
- Posts
- 2
Thank you for the hint!
I see there is much to learn about 3d printing basics - but' it's exciting
Next step for me is to understand what firmware is the best for the CR-10s Pro, where to download and what to configure.
Ufff... gonna have a hard time this weekend
-
05-09-2019, 07:17 AM #4
What are you looking for, your CR10 is basically a newer version of my 3DP11 and 3DP12 - 3D Printers
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help