Results 1 to 4 of 4
Threaded View
-
05-08-2019, 09:35 AM #2
Yes!!! You are correct on all.
Excluding calling your questions stupid, There is only one stupid question - that is a question that was never asked!!!
You should have control of the fan on your CR 10 through the LCD Fan Speed menu Item.
OR
http://marlinfw.org/docs/gcode/M106.htmlLast edited by Roberts_Clif; 05-08-2019 at 09:43 AM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help