Results 1 to 4 of 4
Thread: Print noise?
-
04-30-2019, 03:04 AM #1
- Join Date
- Apr 2019
- Posts
- 2
Print noise?
Has anyone experienced this type of "noise" on printings? Is looks like its only happening with cylindrical models, no matter what model i make. I checked them with Meshmixer for errors, etc and still get this weird kind of "pixels" printed on surface that are not part of the model.
CR-10 S5
PLA
210C 60C
Simplify3D 4.1
Please help!
jpeg_2019-04-30_07-36-02_6.jpgjpeg_2019-04-30_07-36-02_2.jpgjpeg_2019-04-30_07-36-02_1.jpg
-
04-30-2019, 09:30 AM #2
I appears that it could have something to do with the Model Supports feature incorrectly calculating supports on cylinders.
What slicer are you using. Do you have supports enabled
-
04-30-2019, 01:49 PM #3
- Join Date
- Apr 2019
- Posts
- 2
i?m using Simplified3D
-
05-03-2019, 01:30 PM #4
- Join Date
- May 2019
- Posts
- 4
In this placece print speed is change a little bit . please check it.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion