Results 1 to 7 of 7
Threaded View
-
04-20-2019, 07:22 AM #3
- Join Date
- Apr 2019
- Posts
- 2
Thanks for your reply. What would be the purpose of doing the prototype via 3D printing in this case, if the final product will be done by other means (i.e. using a silicone mold)? Couldn't I just use the original plastic of the bike to create the mold?
I was mainly curious to see if only 3D printing could be used to make the actual final product, without the need for creating a mold. Interesting about the silicone molds though, I will do some more research on this.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion