Results 1 to 10 of 16
Threaded View
-
04-16-2019, 02:41 PM #12
- Join Date
- Apr 2019
- Posts
- 10
I used the stock abs profile on standard in FlashPrint. That was set to 225c It slipped/knocked frequently but seemed like it printing fine . I bumped the temp up to 230c and not a single knock heard in a few of those prints and some were 3+ hours
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion