Results 1 to 10 of 16
Threaded View
-
04-15-2019, 01:59 PM #7
- Join Date
- Apr 2019
- Posts
- 10
Here is some of hte ABS I was using. Printing IrishFrogs spool holder to try out
https://www.thingiverse.com/thing:3282844
D4Nx80VUIAAoWur.jpgphoto_2019-04-15_12-34-39.jpg
I'm printing the dual fan cover now then I will try the PLA again.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion