Results 1 to 10 of 11
Thread: heating issue
Threaded View
-
04-10-2019, 03:36 PM #4
- Join Date
- Apr 2019
- Posts
- 9
Thank you for the response TommyDee. I did check it both with the bed heated to temp and the hot end heating up and with just the hot end heating up. It maintained a stable voltage. It is currently set to 13 volts. I also checked it under multiple different situations trying to see if anything changed but nothing.
Last edited by cripto101; 04-10-2019 at 03:49 PM.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help