Results 1 to 10 of 110
Thread: Dollo 3D Printable 3D Printer
Threaded View
-
04-01-2019, 03:09 AM #23
- Join Date
- Oct 2016
- Posts
- 184
Mounted the bed properly, added part cooling fan and wired them properly. After leveling the bed and a couple of test prints I got this benchy printed:
2019-03-31 16.58.55.jpg2019-03-31 16.59.00.jpg2019-03-31 16.59.18-1.jpg
Looking quite good.
Had some jamming problems on the first try, reduced retraction a bit and added filament oiler, no more jams. Also other Z-motor was binding occasionally due to the coupler being just a bit too tight fit, fixed that by wrinting some g-code to move the bed up and down and using a file to smooth out the coupler while moving.
Need todo something about the wiring next and also mount the PSU to the frame.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help