Results 1 to 10 of 10
-
03-30-2019, 10:01 AM #1
- Join Date
- Mar 2019
- Posts
- 6
Ender 3 Marlin bugfix 1.1.x BLtouch ABL issue
Ender 3 Marlin bugfix 1.1.x BLtouch.
I followed the youtube guide by Teaching Tech, I can't post link yet so the youtube video id is sUlqrSq6LeY
Problem:
G29 return:
Recv: Bilinear Leveling Grid:
Recv: 0 1 2
Recv: 0 +0.548 +0.520 +0.478
Recv: 1 +0.570 +0.415 +5.478
Recv: 2 +5.570 +0.500 +0.435
Recv:
Recv: X:235.00 Y:234.00 Z:9.56 E:0.00 Count X:18800 Y:18720 Z:4000Recv: ok
When it probes, it only does 7 points instead of 9 (3x3 grid), it does pause at the unprobe points but the BLTouch pin nerver extends.
I guess the two unprobe points are +5.570 and +5.478 . When the nozzle prints near those position it moves way above and print from there which make the print a mess.
Please help!
-
03-30-2019, 12:41 PM #2
Post Marlin Configuration.h file to a Share file service like Google Drive and post a link.
Will take a look at your firmware settings.
-
03-30-2019, 01:45 PM #3
- Join Date
- Mar 2019
- Posts
- 6
Hi Roberts,
I'm new here, I can't post link yet. Please bear with me.
Configuration.h: paste bin dot com slash eJpfVdKH
Configuration_adv.h: paste bin dot com slash sbM8dScu
-
03-30-2019, 04:14 PM #4
could not find!!!
Create a Google Drive upload files there post the Google Drive share link
-
03-30-2019, 04:16 PM #5
I think this bug was fixed a few days ago... Can you download the latest BugFix code and see if your problem is resolved?
-
03-30-2019, 10:15 PM #6
-
03-30-2019, 10:16 PM #7
- Join Date
- Mar 2019
- Posts
- 6
-
03-30-2019, 10:56 PM #8
- Join Date
- Mar 2019
- Posts
- 6
I just rebuilt the Marlin with the code from here https://github.com/MarlinFirmware/Ma...e/bugfix-1.1.x
The same problem happens.
-
03-31-2019, 09:02 AM #9
I would try to restore factory settings of the firmware,
From LCD Restore Fail safe then Store Settings
From a terminal
M502 Restore EEProm Settings
M500 Save Settings
-
03-31-2019, 11:00 AM #10
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help