Results 1 to 10 of 14
Thread: Looking for pet-g settings
Threaded View
-
03-28-2019, 09:26 AM #10
- Join Date
- May 2018
- Posts
- 566
Try a little more retraction. One thing PETG is good for is spider webs. When the part is done my head moves to the side and there is a spiderweb from the part to the head.. always...
If you are using z lift, try turning that off, I never use lift.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion