Results 1 to 10 of 11
Threaded View
-
03-21-2019, 12:06 PM #5
In Cura Select Preferences Click
In Preferences select Settings Click
Type Speed in the Dialog box
Image2.jpg
Put A check in Support Speed boxes that apply, This will allow you to view and change these settings.
If they do not appear Then upgrade to Cura 4.0.0Last edited by Roberts_Clif; 03-21-2019 at 12:12 PM.
Holes and pockmarks in print walls
Today, 09:14 AM in General 3D Printing Discussion