Results 1 to 4 of 4
Thread: Geetech a30 steppers wont work
Threaded View
-
03-15-2019, 04:31 PM #3
- Join Date
- Mar 2019
- Posts
- 2
in the mean time i already did that i also checked the voltage on the steppers its 24.6 volts on the controllers its .6 volts also all 3 psu ''rails'' are 24 volts
it dident make any difference
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help