Results 1 to 10 of 35
Thread: FLSUN Printer Issue
Hybrid View
-
03-13-2019, 01:46 PM #1
Simply Change the Direction of the stepper.
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false
#define INVERT_Y_DIR false
#define INVERT_Z_DIR false
-
03-13-2019, 03:02 PM #2
- Join Date
- Mar 2019
- Posts
- 21
In the firmware?
-
03-13-2019, 04:32 PM #3
There are two way to change the direction of a Stepper motor.
One - Change in the firmware "#define INVERT_Y_DIR false \\to true "
Two - Rewire to stepper motor to change direction. If this is done wrong the Driver chip can die/become garbage.
https://www.youtube.com/watch?v=-iubywKkNEELast edited by Roberts_Clif; 03-13-2019 at 05:24 PM.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help