Results 1 to 6 of 6
Threaded View
-
03-10-2019, 07:01 PM #5
- Join Date
- Mar 2019
- Posts
- 6
Thank you, but as I said before.
Cura is set up CORRECTLY: X (Width) 220mm / Y (Depth) 280mmm / Z (Height) 200mm
Even if that were the problem, then it would cause an issue when setting up the print in Cura AND it would have an issue at the back of the plate not at the FRONT.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion