Results 1 to 2 of 2
Thread: Cura sending wrong instructions?
-
02-28-2019, 02:29 PM #1
- Join Date
- Feb 2019
- Posts
- 2
Cura sending wrong instructions?
So hello guys,
not sure if this post even belongs here but what ever.
So im thinking that cura making a retarded gcode mid print on purpose or something.
What ive encountered:
Mid print full stop
Mid print weirds string tower build
Mid print rises the y axes and bringing back the x axes which basically dang split the thing i was trying to make
To the last thing im not entirely sure but i think nomatter what the y axes should never go up while printing.
Am i making something wrong?
Also heres a picture of a donked print where the y axes rose up (ive never actually manage to finish a print yet)
DSC_0065.JPG And the STL im trying to print.CFFFP_Angled_Foregrip.stl
Maybe i should say that im using a Tronxy x5s also and pla?
Hope u guys can help me D:
(edit: i know its not the best print but i just wanted to finish something without the printer just stopping)
Also i couldnt get the usb connection to run, well just sort of, i could control the printer and stuff but he wouldnt start actually printing. I think i saw something with "operation system win xp etc) could that be a reason?
-
02-28-2019, 02:59 PM #2
- Join Date
- Feb 2019
- Posts
- 2
after looking very close while printing it seems like its making to big lines and not rising enough to the next layer that could be the cause instead of the whole y axe rising
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help