Results 1 to 4 of 4
-
02-14-2019, 12:34 PM #1
- Join Date
- Feb 2019
- Posts
- 2
Issues with small borders on layers
Hello,First threat here so sorry for possible errors. I have a problem while im printing stuff. Im a total noob on this world but even trying to find a solution i dont find anything. My problem is that my printer somehow make small borders on the layers of the piece im printing on a determinate point of it. It is always on the same point and at start when i made the first pieces(when i bought my printer) i didnt have this problem so i dont know what is happening. I tried to rise tempeture to 210?C because i use PLA but it didnt work so i change parameters to make the piece more slow(less speed i mean) but nothing change so i dont know what to do. Better a image to show it.(sorry for quality but black dont be a good color to show imperfections and have to find a light). The program i use is Cura and my printer is a Creality Ender 3 Pro. Hope someone can help me. Thanks and greetings.
-
02-15-2019, 02:05 PM #2
It's where the layers are starting and ending.
you need to set the layer start to random.
you tend to noptice it most on rounded models.
And if you're using cura - no I don't have a clue where they've hidden the setting.
-
02-16-2019, 01:55 AM #3
- Join Date
- Feb 2019
- Posts
- 2
Ahh thank you very much. I will try that. I cant imagine that this setting have the fault of this. Dont worry i already know where it is and i changed it. I will try like this to see if the change fix the problem.
Greetings.
-
02-19-2019, 01:31 PM #4
- Join Date
- Feb 2019
- Posts
- 3
Working Fine
Thank you so much it worked for me.
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion