Results 1 to 10 of 10
Threaded View
-
02-02-2019, 06:49 AM #2
use outlines as a way to prime the nozzle.
I usually use 2 outlines and generally it prints 1 and a bit.
If in doubt use more outlines :-)
use outlines as a way to prime the nozzle.
I usually use 2 outlines and generally it prints 1 and a bit.
If in doubt use more outlines :-)
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion