Results 1 to 4 of 4
Thread: Phrozen Shuffle does not print!
-
01-22-2019, 01:56 PM #1
- Join Date
- Jan 2019
- Posts
- 3
Phrozen Shuffle does not print!
I have Phrozen Shuffle 3D printer and I am new to 3D printing. After I submit sliced slc image to the printer it starts to print, the platform moves up and down but after it finished there is no print out. The z axis was calibrated according to instruction. What am i doing wrong? Any suggestions? Thanks.
-
01-23-2019, 05:35 AM #2
sounds like the lcd panel isn't working or the led isn't powered up.
Apparently the panel and led light are seperate.
Try a test print without resin and see if the panel is lighting up.
-
01-24-2019, 11:14 AM #3
- Join Date
- Jan 2019
- Posts
- 3
-
01-24-2019, 11:53 AM #4
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion