Results 1 to 10 of 32
Threaded View
-
01-19-2019, 02:30 PM #3
- Join Date
- Jan 2019
- Posts
- 18
I have been using Ultimaker Cura since it came on the SD card that came with the printer. Is there a better slicer to work with?
Print at 60 mm/s as default
Here's an image of what I'm trying to print with the retraction settings on the right. Hope this is what you meant by link to model.
Data.jpg
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion