Results 1 to 1 of 1
-
01-07-2019, 10:36 PM #1
- Join Date
- Jan 2019
- Posts
- 1
Monoprice Select Mini Pro nozzle movement issue
I just got this printer for christmas so I am brand new to all of this. So, on my second print I realized that I couldn't move the z axis downward. After some troubleshooting I found out that it was the distance sensor that was messing it up and it would be able to move back down if I unplugged it. Next couple of prints go fine, although there is a little bit of print curl.
Now, I have no idea why, but when I am trying to set up a print and move the nozzle in the x or y direction, the nozzle will also move up and down in the z direction. Up is moving x to the left, down to the right. Up if I move the print bed towards myself and down if I move it away.
Any ideas on what might have caused this or how to fix it?
Design not printing solid
09-17-2024, 06:12 AM in 3D Modeling, Design, Scanners