Results 1 to 10 of 26
Threaded View
-
12-12-2018, 06:33 AM #10
not even relevant.
it's unlikely you will ever print at 0.05mm on an fdm machine.
Plus they're pretty much guessing anyway :-)
Most printers are 'technically' capable of 0.05 layers. They are all using the same motors. Stepper drivers make a difference, but the hardware is usually - technically - capable.
0.1 is doable, and as low as you're ever likely to want to go :-)
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help