Results 1 to 10 of 18
Thread: Monoprice Mini Delta Review
Threaded View
-
12-05-2018, 06:42 AM #6
hot diggity !
the retraction/temp needs a little tweaking - and I thibk I'll adjust the z-height slightly to make things easier to remove from the bed - but damn !
printed a chinese ball style with three shells, whole thing 10mm across. Came out fairly clean and all three shells move freely !
There's no stringing, but there are a few little blobs.
Could just be the filament.
Next up I'm going to see how small a wheel with bearings I can make.
This kind of thing: https://www.thingiverse.com/thing:2146143
I'm thinking I should be able to print my own 2020 frame wheels.
Being printed:
here's where she lives:
This is the wheel file I've been using: https://www.thingiverse.com/thing:53451Last edited by curious aardvark; 12-05-2018 at 06:49 AM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help