Results 1 to 9 of 9
Threaded View
-
12-04-2018, 05:53 AM #4
for direct drive you probably need 2-3mm and retraction speed as fast as you can get away with. I usually run at 60-70mm/s
1mm just isn't going to make any real difference.
Also measure the extruded filament, looks like over extrusion.
Have you changed the firmware at all ?
looking at the gray bowl - curious as to why you bothered changing anything ?
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help