Please comment your opinion of this little printer

[curious aardvark]

$110 - wow !
Let's hope there's nothing wrong with it :-)
Load some pla filament, make sure the micro sd card is inserted, then press the little led button between the usb and power inputs.
It should print the waving cat.
What i do is wait till the raft and a few layers of the cat are printed then ramp the speed up to 2x.
Knocks it out in about an hour.
Oh yeah I've wiped all the vertical rods with a little lithium grease - made it noticeably quieter. At some point I'll also introduce a tiny amolunt of 3-in-1 oil to the socket joints on the end s of the rods.
Reckon that would cut most of the rattly noise out completely.

As for portability - there are some pretty decent, reasonably priced, li-ion 12v power packs available now that might be worth trying :-)

I presume there's a mini delta forum around somewhere.

Oh yeah adding a more powerful power supply doesn't make any difference to the bed heating.
Fortunately I can use the new psu on the laser engraver - which does need a better power supply if I'm ever to get a decent power laser to work :-)

I do have a car battery I can probably test it with. ut that's not what I call properly portable :-)