Results 1 to 3 of 3
-
11-29-2018, 02:54 PM #1
- Join Date
- Nov 2018
- Posts
- 28
Noob seeks help adjusting bed height
Hi i wanted to get some opinions my bed height.While i know that we typically want to get as close to the bed as possible. I was wondering what the finished product of the very first pass should look like? Should it look like a bead of caulk, or mor flat than that? I'm adjusted downto the thickness of a piece of paper now. This is my first printer so i would be open to any advice about leveling the ender 3 bed.
Thanks all
RobertR728
-
11-29-2018, 03:20 PM #2
If you are using a .4mm Nozzle and printing with a layer height of .28mm.
Your first line will look kind of like an oval it will be about .44 ~ .48 Wide and should be .28 in Height
-
11-29-2018, 09:39 PM #3
- Join Date
- Nov 2018
- Posts
- 28
Beautiful thank you so much for the advice.
RobertR728
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help