Results 1 to 5 of 5
Threaded View
-
11-27-2018, 11:22 AM #2
if you are levelling that often - are you using abs ?
in which case drop the bed temp to 50c and start using pla ;-)
The other thing you can do is change the levelling nuts for locking nuts.
and yes I believe it's makerbot replicator pro clone.
probably made by qidi or flashforge.
I level my makerbot clones about every 6 months - or when adjusting z height in the slicer stops working :-)
The hotter you run the build plate the more often you seem to have to level.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion