Results 1 to 3 of 3
Threaded View
-
11-16-2018, 05:24 AM #2
hotend is a cheap e3d clone.
What you need is a piece of 3mm (might be 4mm - measure hole) outer diameter - 2mm inner diameter, ptfe tubing. That goes from inside the nozzle up to the cooling fins and gives you a tight and consistent feed tube.
Look on amazon a few bucks/pounds will get you about 6 feet.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help