Results 1 to 8 of 8
Thread: Temperature problems?
-
11-15-2018, 11:01 AM #1
- Join Date
- Nov 2018
- Posts
- 6
Temperature problems?
Hello guys!
I have bought a new PLA filament ( Spectrum brand ) but i have issues with printing. It's not sticking, or not melting? I do not know.
Already tried:
-Lowered the cooling fan speed down to 40%
-Multiple nozzle size ( 0,2 and 0,4 )
-print with 180C? - 230C?
Pictures:
Thanks for your help!
-
11-15-2018, 11:14 AM #2
This looks like it was sliced for 3mm then printed with a 1.75mm nozzle, because of the gaps between layers.
Do you have more pictures, Printer type, Slicer and slicer settings, Bed tempature, anything.
-
11-15-2018, 11:25 AM #3
- Join Date
- Nov 2018
- Posts
- 6
-
11-15-2018, 12:41 PM #4
- Join Date
- Nov 2018
- Posts
- 6
Link for the pictures:
https://imgur.com/a/5YAECeh
-
11-15-2018, 05:58 PM #5
They look almost like my Profiles only I print PLA at 198C.
Attached are My Cura profiles examine them and see how the compare to yours.
-
11-16-2018, 01:29 AM #6
- Join Date
- Nov 2018
- Posts
- 6
Thank you. Im going to try 0,15 right now.
-
11-16-2018, 12:34 PM #7
- Join Date
- Nov 2018
- Posts
- 6
-
11-16-2018, 01:57 PM #8
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery