Results 1 to 10 of 13
Threaded View
-
10-31-2018, 02:27 AM #6
- Join Date
- Oct 2018
- Location
- South Africa
- Posts
- 7
You were right!! I tried another config program and managed to find my LCD specifically! The LCD is working now, thank you two for your help! Unfortunately I still have one more problem, the temperatures are still stuck. I'm thinking it is a problem with the hotend thermistor, as when I tighten it it changes from 111 degrees to -14. But what confuses me is that the bed temperature stays at around 108 degrees, which is strange because I never touched it. After replacing the nozzle the temps just jumped there and stayed there.
Last edited by Bernard; 10-31-2018 at 03:58 AM.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)