Results 1 to 3 of 3
Thread: Extruder #2 dragging
Threaded View
-
10-29-2018, 07:39 AM #2
check there isn't a tiny bit of filament sticking out of the nozzle.
If I've been printing with the other nozzle before switching. I'll make sure no filament protudes by a quick rub with a sanding block. Surprising just how little there needs to be to cause issues.
Other than that - can't really help.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion