Results 1 to 10 of 102
Threaded View
-
10-13-2018, 07:55 AM #11
Did i already mention how much I dislike arduino ide ?
The only place I've found to set the baudrate is: tools, serial monitor. Where i set it to 250000 and it seems to work fine.
However when i come to upload I get this in the error message:
C:\Program Files\Arduino\hardware\tools\avr/bin/avrdude -CC:\Program Files\Arduino\hardware\tools\avr/etc/avrdude.conf -v -patmega1280 -carduino -PCOM2 -b57600 -D -Uflash:w:C:\Users\Alex\AppData\Local\Temp\arduino_ build_722464/Marlin.ino.hex:i
System wide configuration file is "C:\Program Files\Arduino\hardware\tools\avr/etc/avrdude.conf"
Using Port : COM2
Using Programmer : arduino
Overriding Baud Rate : 57600
avrdude: stk500_recv(): programmer is not responding
Had a look at avrdude.conf and it says: don't edit this file as it will be overwritten next time you compile.
Which would suggest that something, somewhere is telling it the baud rate is 57600.
AAAAAAARRRRRRGGGGGHHHHHHHHHH !Last edited by curious aardvark; 10-13-2018 at 08:03 AM.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion