Results 1 to 9 of 9
Threaded View
-
10-11-2018, 05:03 AM #9
so, in other words stick to a 12 volt psu for 12 volt printer.
something like this: https://www.amazon.co.uk/Constant-Vo...ds=12v+led+psu
Will probably give you a lot more power for a lot less money and all of it 12volt.
Plus one psu per printer make smore sense - particularly if you add an on/off switch to the power cable.
Having more than one printer on a single psu does seem a bit dodgy to me.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion