Nice, looking at your build makes me think I could have gone a bit different way like the corners and rod holders. Have you got it running yet?

All files are here: https://github.com/spegelius/Origina...tree/MK2_Dollo. I'll be doing some fine tuning and PSU cover and RAMPS enclosure need to be done too.

Still missing few pieces: GT2 pulley for the X-axis and some M2x12 bolts for the endstops (probably could get something hacked together, but I'll do this properly). Also RAMPS fw needs to be modded from Prusa sources, which should mean basically just adding RAMPS pin assignments and tuning the steps. Found this: https://www.thingiverse.com/thing:2607463, there's the pins_ramps.h file I need.