Results 1 to 10 of 12
Thread: Can Eny Help me out a drawing
Threaded View
-
09-25-2018, 04:02 PM #3
- Join Date
- Sep 2018
- Posts
- 6
WOw meny thks You are amazing
The inner lip appears to be 1.37 mm thick. This is the outer part of the lip. The lip should turn out and have a slight slant, but does it have a sloping inner edge? My picture did not show the profile. 4.5 mm is the total width of lip What represents 3.5 mm is the quarter circle lip is 1.37mm thick overall height is 2.30mm and 4.5mm dimensions? It seems that you need a total height of 2.3 mm. Can you confirm that this is correct? The size of 101 mm applies to the outer diameter include the lip
Last edited by maxmekkeer50; 09-25-2018 at 04:42 PM.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion