Results 1 to 7 of 7
Threaded View
-
09-18-2018, 06:23 PM #2
- Join Date
- Jun 2014
- Posts
- 885
So many options present themselves here. The holes out on the ends of the wings could have rubber feet pressed into place. If coating is your inclination, a can of Plasti-Dip in your choice of color will give you a nice spray-on non-slip finish. If you mask the part properly, only the bottom will get coated. That would be my choice, but only because I have two cans of the stuff.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help