Close



Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 31
  1. #21
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,801
    check the connections to the motherboard.
    The lcd screens are only about $10 - but could be the board.

    Do any of the other printers have similiar screen ? Might be worth trying one if they do.

  2. #22
    Staff Engineer
    Join Date
    Jun 2014
    Posts
    892
    If the machine has a USB port (B type, typical of printers), what would happen if a computer is connected to the printer? Wouldn't it be possible to communicate using something like Pronterface or Octoprint (OctoPi)? At the very least, it can tell you if the board is working and the display is bad.

  3. #23
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,801
    good point, yes has usb connection.
    what you want is makerware.
    http://www.mediafire.com/download/6b...4.0.14_x64.exe
    that version is much better for the older machines than the current one.

  4. #24
    Ooops, I missed the last two posts. Good suggestion. I'll try it on Monday. I have a box with eleventeen billion A/B USB cords in it.

  5. #25
    Quote Originally Posted by fred_dot_u View Post
    If the machine has a USB port (B type, typical of printers), what would happen if a computer is connected to the printer? Wouldn't it be possible to communicate using something like Pronterface or Octoprint (OctoPi)? At the very least, it can tell you if the board is working and the display is bad.
    I am disappointed to report that Makerware does not seem to recognize my Makerbot.

  6. #26
    I am thrilled to report that I got one of the Solidoodles to be recognized by my computer and successfully extruded 100mm of blue PLA.

    Onward!

  7. #27
    Staff Engineer
    Join Date
    Jun 2014
    Posts
    892
    Let the pigeons loose! Huzzah and hoorah, even!

    Seriously, that's good news. Thanks for passing it on to the forum.

  8. #28
    Staff Engineer
    Join Date
    Jun 2014
    Posts
    892
    When you connect the Makerbot to the computer, does a new port or device appear in the device manager? This would indicate at least that the FTDI device is talking to the PC (if Makerbots are so equipped). If so equipped and no port assigned, that's not such good news.

  9. #29
    I successfully printed Benchy the boat on two Solidoodles this morning in ABS. I?m thrilled and relieved. I?ll start trying to refine my print quality this week.

    MakerBot appears to be dead. MakerBot tech support suggested a firmware update to try flashing the Replicator with but it didn?t work. They said they could not provide any further support on such an old machine.

    This is fun!

  10. #30
    Staff Engineer
    Join Date
    Jun 2014
    Posts
    892
    Quote Originally Posted by matthewkphx View Post
    MakerBot appears to be dead.

    This is fun!
    If the primary components (steppers, hot end, heat bed, etc) appear to be in good shape, you might get away with replacing the controller board with something more contemporary and flashing the required values into the firmware. Advanced 3D printer repair 601.

Page 3 of 4 FirstFirst 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •