Results 1 to 7 of 7
Threaded View
-
08-27-2018, 05:55 PM #5
1 Hour, See Photo
Have never Printed slower than 32% on the first layer.
I found some better information
Other Notes:
http://www.soliforum.com/topic/15529...-print-speeds/
Print Speed CalculatorLast edited by Roberts_Clif; 08-28-2018 at 09:17 AM.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion