Results 1 to 7 of 7
-
04-20-2018, 03:07 PM #1
- Join Date
- Mar 2018
- Posts
- 21
CR-10S Do I have the upgraded board? Pic Inside
So I bought a CR-10S a few weeks ago and noticed it had the problems that people are posting about, with the capacitor and such. It prints great, but I asked the seller if they could send me an upgraded board. From what i read Creality did fix the problem. I don't want to go to the trouble of installing if it's just the same board. Can anyone tell me if this is the new board?IMG_0885.jpgIMG_0886.jpg
-
06-01-2018, 08:50 AM #2
Is it this one, :
https://www.amazon.com/Upgraded-Moth...reality+cr-10s
-
06-01-2018, 09:40 AM #3
- Join Date
- Mar 2018
- Posts
- 21
It is. The capacitor should have a 200 on it, the bad ones have a 100 on it.
-
06-05-2018, 08:34 AM #4
I’m getting a cr10s, I’ll look into the board to determaine if it’s the new unit
-
06-27-2018, 05:57 AM #5
looks like a decent board.
Can't you just compare the two and if the new one is different it's probably the upgraded version :-)
-
07-17-2018, 04:16 AM #6
- Join Date
- Jul 2018
- Posts
- 1
good one.. it is indeed of big help
-
05-10-2020, 04:17 PM #7
Anyone else have any issues with Creality boards? I'm especially looking for experiences with the Creality 3D CR-10 Pro V2 model. It seems very interesting.
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help