Results 1 to 3 of 3
Thread: Shut down
-
07-10-2018, 11:01 PM #1
- Join Date
- Jul 2018
- Posts
- 3
Shut down
I have a bought in 2017 Creator Pro. I had a unfortunate accident that all the PLA plastic got stuck in the hot end printing over night. While trying to get the plastic out I left the machine on while heating the plastic for easier removal. I touched the heater wires together witch caused my machine to do a temp shut down then reboot to normal operations. Since then I installed new heater and thermocouple. Everything heated fine for unload and loading grate. I even updated the firmware to the newest today. I tried to print with the flashprint and My printer will shut down and reboot almost immediately. I have simply3D and that slicer works fine. I'm new to this as I just started in December. I have about 500 hrs. of printing. I'm wondering what possible could be going wrong in the Flashprint to why its stopping and reboot my printer.
-
07-12-2018, 05:58 AM #2
did flashprint work before you updated the firmware ?
And are you running the latest version of it.
Also are you printing over usb or from an sd card ?
-
07-13-2018, 04:57 PM #3
- Join Date
- Jul 2018
- Posts
- 3
Yes flashprint worked fine before firmware and yes I have the recent program.
I've been printing with simplify3d with no shutdowns. I've printed ABS and PLA with both extruders no problems with Simp3d.
I'm running a wifi SD Card.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help