Results 1 to 10 of 18
Thread: SSR keeps melting.
Threaded View
-
07-07-2018, 10:41 AM #5
- Join Date
- Feb 2015
- Posts
- 371
I am using 12 gauge wire and just using bare wires into the screw terminals. it is melting on the side the power supply is attached to, not the side my control board is attached to. I have used the Omron and a different SSR with no long term luck.
IMG_6139.jpgIMG_6138.jpgIMG_6141.jpgIMG_6142.jpg
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion