After getting this back together and printing a few things, I have decided to swap the extruder drive motor. The pancake motor it currently uses is a genuine e3d 0.9 degree motor. I am swapping it to a regular size 0.9 degree stepper motor for a few reasons. I am considering a volcano hotend and 0.6mm nozzle at some point. And also because I wish to use this genuine e3d pancake 0.9 degree motor for another lighter duty printer. The thing about these nema17 0.9 degree stepper motors is they don't come with connectors so wires must be soldered...The pancake stepper motors are for the smaller printers with the smaller nozzles. Here we need bigger and better. And thankfully the mount I printed will fit an even larger motor than what I am using.