Results 1 to 10 of 16
Thread: Best way of cleaning nozzles?
Threaded View
-
06-23-2018, 11:29 AM #7
- Join Date
- Jan 2016
- Posts
- 326
I tried the cold pull but the filament was stuck. I heated the extruder to 230C and pulled the filament out. The end of the filament was thicker than the rest of it. Should I pull the filament out after printing something and I think I don't use the printer for a while?
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion