Results 1 to 10 of 10
-
04-09-2016, 08:53 AM #1
- Join Date
- Apr 2016
- Posts
- 1
Design help and 3d printing/ prototyping
Hi All,
I'm designing a relatively small item - 60mm x 40mm x 15mm max dimensions, and need some expertise in completing it in readiness for 3d printing. I'm currently using sketchup and need some help especially with the simple curves (although I'm willing to switch platforms if required).
I'd like to pay someone to complete the design for me and potentially print it for me, however, it may be more simple to get a local firm to print depending on your location.
There will be recurrent work available as I develop the prototype and make other products to create a range.
Please let me know if you're interested.
Cheers
-
04-26-2016, 06:00 PM #2
- Join Date
- Apr 2016
- Posts
- 3
Hey badjet,
If you are still in need of assistance, we would love to help you out.
Please contact me at admin@lucky8sentertainment.com or submit a message at http://www.lucky8sentertainment.com and we'll get back to you right away!
Thanks for your time,
Christian
Owner
Lucky 8s
www.lucky8sentertainment.com
-
04-27-2016, 10:44 AM #3
Hi badjet,
If you have not found anyone yet I would be happy to help. Please visit our website:
www.customprototypes.ca
tel. +1 416 955-0857
Best regards
Andrew
-
04-27-2016, 06:37 PM #4
- Join Date
- Apr 2016
- Location
- Gold Coast, Australia
- Posts
- 11
Hi Badjet,
Let me know if you want a quotation to go along with other Christian or Andrew, I don't usually use sketch-up but I can have a look at your model free of charge and discuss your requirements. We're a new start-up in Australia and are very competitive with pricing.
You can PM me through the board, email me at christian@makecorps.com or use the contact us form on the site at www.makecorps.com/contact-us or call me on +61 401 88 MAKE (6253), note that I am in Australia so it is going to be cheaper for you to email unless you are an Aussie yourself.
Regards,
Christian
-
03-29-2017, 04:00 AM #5
Hi,
As a product designer I am expertised in 3D printing for prototyping, contact me at ralphzoontjens@gmail.com and if you send me the sketchup file I will send you a quote.
We can print it in the studio so we will have very quick development cycles.
Thanks,
Ralph
-
06-03-2018, 01:08 AM #6
- Join Date
- Jun 2018
- Posts
- 3
looking to have these made
Need someone to scan and think 3d print them out. Depending on costs can make more or less to be economical.
wheel center cap in 52mm ,NLA
see link for picture
https://www.screencast.com/t/ci8GY2vZKP
thank you
-
06-15-2018, 10:27 AM #7
-
06-16-2018, 08:23 AM #8
- Join Date
- Jun 2018
- Posts
- 3
-
09-22-2018, 10:02 AM #9
- Join Date
- Sep 2018
- Posts
- 4
Hello. If you need assistance, contact me here
-
03-02-2021, 04:56 PM #10
We have formlabs and photocentric SLA machines in house !
Get in touch for best prices!
https://industrialforms.co.uk/produc...aphy-apparatus
Hello from Industrial Forms!
We can offer really good prices and great service for your product !
Get in touch for free quote or project review by sending me email
robert.plauszewski@industrialforms.co.uk or true our website
www.industrialforms.co.uk
Ohh please don't forget visit our gallery to check our project !
We are doing the best service only !
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help