Results 1 to 4 of 4
Thread: Problem second print Bl touch
-
05-31-2018, 02:30 AM #1
- Join Date
- May 2018
- Posts
- 2
Problem second print Bl touch
Hi everybody
I have a problem with my Bltouch: I have read a lot of articles and it is far from simple;
to launch the first print:
g28;
G29;
m500;
no problem the bed leveling is top
however, to launch the second print
g28;
M420 S1 (to reactivate bed leveling)
I lost the offset z and so it's bad because of what I read the G28 that makes a kind of reset
Do you have an idea to keep the points? for a second impression
Thank you !!
-
05-31-2018, 08:19 AM #2
Have you tried Z-Offset " M851 Z-0.44 " Sets the Z-offset the input -00.44
-
05-31-2018, 08:36 AM #3
- Join Date
- May 2018
- Posts
- 2
Thanks but why -0.44 ? this number?
-
05-31-2018, 11:31 AM #4
That number is my Z-Height - You will set your own Z-Offset
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery