Results 1 to 4 of 4
-
05-24-2018, 07:26 AM #1
- Join Date
- May 2018
- Posts
- 9
Looking for a part for a makerbot 5th gen
I got this from a auction and the extruder carriage assembly was not secured. no warranty. The clips in the second are broke off, and the aluminium piece it connects to has the screw holes that secure the head broken off.. Anyone have a spare makerbot 5th gen head and carriage assembly can buy? Or any suggestions where I can print a new plastic carriage assembly?
IMG_3346 (3).JPGIMG_3347 (1).JPGLast edited by raverpunk101; 05-24-2018 at 07:34 AM.
-
05-24-2018, 11:16 AM #2
- Join Date
- Jun 2014
- Posts
- 887
You didn't get this in an auction in Florida, did you? Edgewater?
-
05-24-2018, 12:11 PM #3
- Join Date
- May 2018
- Posts
- 9
-
05-24-2018, 05:14 PM #4
- Join Date
- Jun 2014
- Posts
- 887
A friend and I had looked at the two that were up for grabs. The all-metal one is the better of the two, but it seemed to be in pretty rough shape. I've sent a PM to you for contact outside this forum.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help