Results 1 to 5 of 5
Thread: First printer advice
-
04-20-2018, 04:14 PM #1
- Join Date
- Apr 2018
- Posts
- 2
First printer advice
Hello, I was looking to see if there was an assembled 3D printer worth the money for under $500. I would like to stay away from DIY in the meantime for my first couple of months. Most of the experience I have is with creative sculpting and not necessarily electronics, I want an easier time with the process in the beginning. Thanks.
-
04-21-2018, 07:09 AM #2
what sort of print size were you thinking about ?
Plenty of ready built machines for that money - but most tend to be around the 150mmx150mmx150mm print volume - some are smaller.
Also which country are you in ?
-
04-21-2018, 12:44 PM #3
- Join Date
- Apr 2018
- Posts
- 2
-
04-21-2018, 01:14 PM #4
HICTOP 12V 3D Printer Prusa I3 Pre-assembled Aluminum Large Print Size 300x300x400mm CR-10 $499.00
https://hic-3d-printer.myshopify.com...ns/3d-printers
Simple Assembly even for first timer's Many how to You-Tube Videos
https://www.youtube.com/watch?v=Cdkb_ILCptw
You will find assembly in the 21st century has became even easier with the HICTOP CR10
-
04-24-2018, 01:50 PM #5
out of that lot - this looks like the best for a beginner.
few more bells and whistles.
https://hic-3d-printer.myshopify.com...ts-support-abs
Resin has changed after...
06-18-2024, 10:34 AM in General 3D Printing Discussion