Results 1 to 10 of 17
Threaded View
-
04-21-2018, 06:04 PM #2
- Join Date
- Mar 2018
- Posts
- 21
Follow up. I just finished the last test. 250C 25mm/s No Fan. Prints great and strong, but not nearly as strong as the slower less hot ones. I think I'll go with 242C 15mm/s No Fan. Here a pic of the finished part and break line. It's not breaking at the layer line.
IMG_0907.jpgIMG_0908.jpg
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion