Results 1 to 8 of 8
Threaded View
-
04-18-2018, 07:49 PM #6
- Join Date
- Jan 2016
- Posts
- 326
I thought that I have under extrusion on some parts of the 3DBenchy boat like the exhaust stack and the box behind the cabin. I can break off the stack and there is a small gap on top of the box that should have been filled. I think that there is a setting in Simplify3D that is supposed to fill in the gaps.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help